Planning And Engineering; Planning Process - Nortel 1000 Fundamentals

Planning and engineering

This chapter contains information about topics you must consider before
you implement Converged Office.
Planning and engineering navigation
•
•
•
•
•
•
•
•
•

Planning process

Before you install and configure Nortel Converged Office, you must consider
the network size and its impact on the type of software and hardware
required.
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
Copyright © 2005–2008, Nortel Networks
.
"Introduction" (page 35)
"Network Design" (page 36)
— "Small network" (page 37)
— "Medium network" (page 38)
— "Large network" (page 39)
— "Multiple customer network" (page 40)
— Figure 14 "Multiple location network" (page 42)
"Load Balancer planning information" (page 43)
"Capacity Planning" (page 46)
"General Requirements" (page 51)
"Telephony Gateway and Services planning" (page 66)
"Remote Call Control with SIP CTI" (page 73)
"LCS 2005 and OCS 2007 coexistence" (page 82)
"Migration planning from LCS 2005 to OCS 2007" (page 84)
Nortel Communication Server 1000
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
35