Craftsman 126.32561 Operator's Manual page 32

To engage the stop outboard:
Slide the spring-loaded release lock
forwards.
Pull the stop from its stored position
upwards and to the right to the outboard
position.
Slide the release lock backwards to lock
the stop into position. (Fig. Z)
To stow away, reverse the above steps.
(Fig. Z)
PRECISE POSITIONING OF THE
STOP PLATE
Engage the Stop Plate to the inboard or
outboard position as outlined above.
Push the release button (Fig. AA 2) on
the front of the machine base below the
stop plate.
Slide the Extension Arm from the
machine base, and release the button
when at the approximate required
distance. (Fig. AA)
\
(2)
1. Adjustment knob
2. Release button
(Fig. AA)
The Extension Arm has a micro adjustment
facility for final positioning. (Fig. AA 1)
Turn the adjustment knob clockwise or
counterclockwise as required for final exact
positioning of the stop plate.
Extension Arm
With the stop plate in its stored position the
Extension Arm can be used to support long
workpieces (Fig. BB)
o\
(Fig. BB)
32