Advertisement
Available languages
Available languages
CAUTION
l
Dispose of the contents of the dust
collection bag in an environmentally
responsible way. It may be neccesary to
wear a dust mask when emptying the dust
collection bag.
INSTALLING THE HOLD DOWN CLAMP
(Fig. C)
Two sockets (one on either side) are
incorporated into the rear of the machine
fence.
1. Fit the clamp into the retaining socket that
best suits the cutting application, ensuring
that it is fully pushed down.
2. Tighten the fence thumbscrew to lock the
pillar of the Hold Down Clamp into the fence
socket.
3. Put the workpiece to be cut onto the saw
bed.
4. Adjust the clamp using the thumbscrew
and hand-wheel so that it securely holds the
workpiece to the saw bed. Ensure that the
clamp does not interfere with the blade path.
INSTALLING OR REMOVING A BLADE
1_,
WARNING
I
Only use blades which are specified
for use with this machine. Ensure that
the maximum speed of the blade is
compatible with the machine. Only carry
out this procudure with the machine
disconnected
from the power source.
NOTE: Wear protective gloves when handling
the blade during installation and removal.
1. Ensure the cutting head is up.
2. Push the button at the front of the auxiliary
guard, and rotate the auxiliary guard to
expose the arbor bolt. (Fig. D)
(Fig. C)
19
Advertisement
