Table 22. Removal steps of keyboard bezel (continued)
5
In step
, detach the claws. Then remove the keyboard bezel in the direction shown by arrow
Attention: When you service the keyboard bezel, avoid any kind of rough handling.
When installing: Make sure that all the claws are attached firmly.
1150 I/O card assembly
For access, remove these FRUs in order:
•
"1010 Digitizer pen" on page 61
•
"1020 Battery pack" on page 61
•
"1060 Keyboard" on page 68
•
"1080 Palm rest" on page 72
•
"1110 PCI Express Mini Card for wireless WAN" on page 78
•
"1140 Keyboard bezel" on page 83
6
.
.
Chapter 8
Removing and replacing a FRU
85