For some models, you need to apply one or two FCC labels,
one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.
For the location of each label, refer the following figure:
2010 LCD front bezel
For access, remove this FRU:
• For access, remove this FRU:
–
"1020 Battery pack" on page 61
Table 29. Removal steps of LCD front bezel for protection plate LCD model
Protection plate LCD model:
Step
Screw cap
Screw (quantity)
7a
10
and
. Check the old base cover; if it has
Color
.
Chapter 8
Removing and replacing a FRU
Torque
103