Table 23. Removal steps of BDC-2
Step
Screw (quantity)
1
M2 × 3 mm, wafer-head, nylon-coated (1)
When installing: Make sure that the connector on bottom side of the card is attached firmly to the system board.
1150 Media Card Reader slot board and Media Card Reader cable
assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 59
• "1020 ExpressCard blank bezel and Media Card blank bezel" on page 60
•
"1030 Optical drive or travel cover" on page 62
•
"1090 SIM slot cover" on page 71
•
"1110 Palm rest assembly with cables" on page 75
1
2
Torque
Color
Black
0.181 Nm
(1.85 kgfcm)
.
Chapter 8
Removing and replacing a FRU
81