Computer Connection; Print A Demo Page; Usb Connection - Oki C9850hdn Setup Manual

Insert the Power Cable
Insert the power cable and turn the
printer ON.
CAUTION!
Do not connect this product to an
uninterruptible power supply (UPS). For
further information please contact Oki Data
at 1-800-OKIDATA or www.okidata.com.
WARNING!
Be sure to use 15A AC power cord supplied
with the printer. Use of a power cord NOT
supplied with this printer, or an extension
cord, may result in overheating, and could
be a safety hazard.

Print a Demo Page

1 Press Menu on the control panel.
2 Press the down arrow to select Print
Information. Press Enter.
3 Press the down arrow to select Demo
Page. Press Enter.
4 Demo1 appears. Press Enter.
5 Execute appears. Press Enter.

Computer Connection

Install Network Cable
In order to reduce electromagnetic
interference—"noise" that interferes with
TVs or other appliances—you must place
the included ferrite core on the network
cable.
1 Loop the cable as shown placing the
core about 1 inch from the connector
on the printer end. Note: The network
cable is not provided.
2 Connect the network cable between
the printer and the Ethernet hub or
router.
18

USB Connection

Note: Install the printer software BEFORE
installing the USB cable. See
"Connect the USB cable" on page 8.
C9850 Setup Guide
5