Insert Power Cable; Computer Connection - Oki B4100 Setup Manual

Insert Power Cable

Insert the power cable.
Note: Do NOT turn the printer on.
WARNING!
Be sure to use the 15A AC power cord supplied
with the printer. Use of a power cord NOT
supplied with this printer, or an extension cord,
may result in overheating, and could be a safety
hazard.
CAUTION!
To prevent fire or shock hazards, connect
the power plug only to a properly rated
power outlet.
Do not connect this product to an
uninterruptible power supply (UPS). For
further information please contact Oki Data
at 1-800-OKIDATA or www.okidata.com.

Computer Connection

Note: Interface cables are not supplied.
Network Connection
Connect the network cable between the printer
network port and the Ethernet hub or router.
USB Connection
Note: If installing for Windows© with USB
connection, install the software BEFORE
installing the USB cable. See "Software
Installation" on page 9.
Connect the USB cable between the printer USB
port and the computer.
Parallel Connection
Note: Requires UL approved bi-directional (IEEE
1284 compliant) cable.
Connect the Parallel cable between the printer's
Parallel port and the computer.
English 8