Possible Cause
The authentication methods
between the printer and the
access point do not
coincide.
The encryption methods
between the printer and the
access point do not
coincide.
The Cipher Suite between
the printer and the access
point do not coincide.
(Cipher Suite indices a
combination of the key and
cipher methods for EAP-TLS
authentication)
Suggested Solution(s)
Check the EAP method supported by the access
point and check whether it supports EAP-TLS.
Change the encryption method of the access point
to TKIP.
Change the setting of the RADIUS server and set
the Cipher Suite supported by the RADIUS server
to Active.
Below are the Cipher Suites supported by the
printer.
• DES 64 bit encryption
• DES 64 bit encryption
15
EAP Authentication Failure