Toner Rubs Off The Printed Surface - Oki C9300 User Manual

Toner rubs off the printed surface.

Possible cause
Media Weight and Media Type
settings may not be appropriate.
Packing materials left on the fuser
when it was installed.
C9300/C9500 Troubleshooting • 200
Remedy
Set the value of media weight to the
next heaviest one.
Careful! Fuser may be HOT! Open the
top cover and check to be sure that all
packing materials were removed from
the fuser. To remove the fuser, see
"Changing the fuser unit" on page 174.