Pcl Emulation - Oki C9300 User Manual

Item
FONT SOURCE
FONT NO.
FONT PITCH
FONT HEIGHT

PCL emulation

The default settings are
Value
Resident; DIMM0;
Downloaded
I000, C001, S001
0.44 cpi to 99.99 cpi in
0.01 cpi increments
Default = 10.00 cpi
4.00 to 999.75 point, in
0.25 point increments
Default = 12.00 point
C9300/C9500 Setting up • 50
bold
.
Description
Selects location of the PCL
font used.
DIMM0 is displayed only when
font DIMM ROM exists in the
slot.
Downloaded only appears if
fonts have been downloaded
to the printer.
Sets the PCL font number.
I = internal (resident font);
I000 = Courier.
C = Font stored in the printer's
Flash memory.
S = downloaded soft font,
stored on the printer's internal
hard disk drive. Applies only to
printers with a hard disk drive
installed.
Sets the font width in
characters per inch. Only
displayed if the font is a fixed
spacing outline font.
Sets the font point size.
Applies only to fixed fonts
(does not apply to proportional
fonts).