Toner Rubs Off The Printed Surface - Oki ES3037 User Manual

Toner rubs off the printed surface.

Possible cause
Media Weight and Media Type settings
may not be appropriate.
Packing materials left on the fuser
when it was installed.
ES 3037/3037e Troubleshooting • 217
Remedy
Set the value of media weight to the next
heaviest one.
Careful! Fuser may be HOT! Open the top
cover and check to be sure that all packing
materials were removed from the fuser. To
remove the fuser, see "Changing the fuser
unit" on page 192.