Oki C9300 User Manual page 60

Item
OFFLINE
RECEIVE
Only appears if the network card is installed.
Item
TCP/IP
NETWARE
ETHERTALK
NETBEUI
FRAME TYPE
DHCP/BOOTP
RARP
IP ADDRESS
SUBNET MASK
GATEWAY
ADDRESS
PRINT
SETTINGS
INITIALIZE
USB menu (continued)
The default settings are bold.
Value
Enable; Disable
Network menu
The default settings are bold.
Value
Enable; Disable
Enable; Disable
Enable; Disable
Enable; Disable
Auto; 802.2; 802.3
Ether-II; Snap
Enable; Disable
Enable; Disable
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
ON; OFF
ON; OFF
C9300/C9500 Setting up • 58
Description
When set to Enable, this function
maintains reception without
changing the interface signal,
even if an alarm occurs. The
interface stays open even if the
ON LINE button is pressed. The
interface issues a BUSY signal
only when the receive buffer is
full or when a service call occurs.
Description
Selects TCP/IP protocol.
Selects Netware protocol.
Selects EtherTalk protocol.
Selects NetBEUI protocol.
Selects Ethernet frame type.
Selects whether selection of
DHCP/BOOP is automatic.
Selects whether selection of
RARP is automatic.
Configures IP address of 12
alphanumeric characters.
Configures subnet mask of 12
alphanumeric characters.
Configures gateway address of
12 alphanumeric characters.
Selects printing of network menu
map.
Selects network initialization.