History Window Notes - HP XP P9500 User Manual

Operation Displayed
Status Change by MCU(PSUS/PSUE to SMPL)
Status Change by MCU(PSUS/PSUE to COPY)
Status Change by RCU(Pairsplit-r Start)
Status Change by RCU(Pairsplit-r Complete)
Status Change by RCU(PSUS/PSUE to SMPL; Pairsplit-S
Start)
Status Change by RCU(COPY to SMPL; Pairsplit-S Start)
Status Change by RCU(PAIR to SMPL; Pairsplit-S Start)
Status Change by RCU(Pairsplit-S Complete)
Ready for Delta resync
Ready for Delta resync(Failure)
Status Change for Delta resync
Status Change by MCU(SMPL to HOLD)
Status Change by MCU(HOLD to PAIR)
Status Change by MCU(HOLD to COPY)
Status Change by MCU(HOLD to SMPL)
Status Change by RCU(HOLD to SMPL; Pairsplit-S Start)
Status Change to HOLD
Unknown

History window notes

The operation rows may not appear in chronological descending order. To sort the information
in descending (or ascending) order, click a heading.
The history file always contains the most recent operations up to a maximum of 524,288
operations. Information older than seven days is not shown.
180 Continuous Access Journal GUI reference
Description
The status of the pair was changed from PSUS or PSUE to
SMPL because of an operation from the primary storage
system.
The status of the pair was changed from PSUS or PSUE to
COPY because of an operation from the primary storage
system.
The status of the pair was changed because an operation
for splitting a pair started at the secondary storage system.
The status of the pair was changed because an operation
for splitting a pair finished at the secondary storage system.
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from PSUS or PSUE to SMPL.
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from COPY to SMPL.
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from PAIR to SMPL.
The status of the pair was changed because an operation
for releasing a pair finished at the secondary storage
system.
A pair became ready for delta resync.
The failure occurred with the pair which was ready for
delta resync.
The status of the P-VOL was changed to HOLD because of
a delta resync operation.
The status of the pair was changed from SMPL to HOLD
because of an operation from the primary storage system.
The status of the pair was changed from HOLD to PAIR
because of an operation from the primary storage system.
The status of the pair was changed from HOLD to COPY
because of an operation from the primary storage system.
The status of the pair was changed from HOLD to SMPL
because of an operation from the primary storage system.
An operation for releasing a pair has been started at the
secondary storage system. The status of the pair will change
from HOLD to SMPL.
The status of the S-VOL was changed to HOLD because of
a delta resync operation.
The storage system could not identify the type of the
operation.