Glossary - HP XP P9500 User Manual

Glossary

CLI Command-line interface. An interface comprised of various commands which are used to control
operating system responses.
CLPR Cache logical partition.
Cnt Ac-J P9000 or XP Continuous Access Journal software.
Cnt Ac-J Z The version of Continuous Access Journal that supports mainframe volumes.
Cnt Ac-S P9000 or XP Continuous Access Synchronous software.
Cnt Ac-S Z The version of Continuous Access Synchronous that supports mainframe volumes.
command device A volume in the disk array that accepts Continuous Access, Business Copy, or P9000 for Business
Continuity Manager control operations, which are then executed by the array.
CU Control Unit. Used to organize the storage space attached to the disk controller ( DKC). You can
group similarly configured logical devices (LDEVs) with unique control unit images (CUs). CUs
are numbered sequentially. The disk array supports a certain number of CUs, depending on the
disk array model. Each CU can manage multiple LDEVs; therefore, both the CU number and the
LDEV number are required to identify an LDEV.
DKC Disk controller.
ERC Error reporting communications.
failover The process that occurs when one device assumes the workload of a failed companion device.
Failovers can be planned or unplanned.
fence level A method of setting rejection of P9000 or XP Continuous Access write I/O requests from the host
according to the condition of mirroring consistency.
Fibre Channel A data transfer architecture designed for mass storage devices and other peripheral devices that
require high bandwidth.
instance A running copy of RAID Manager. Instances can be local or remote. Multiple instances can run
on the same host.
instance A RAID Manager file that defines the link between a volume and a RAID Manager instance. This
configuration file file consists of five sections: HORCM_MON, HORCM_CMD, HORCM_DEV, HORCM_LDEV, and
HORCM_INST.
LDKC Logical disk controller.
LUN Logical unit number. A LUN results from mapping a logical unit number, port ID, and LDEV ID to
a RAID group. The size of the LUN is determined by the emulation mode of the LDEV and the
number of LDEVs associated with the LUN.
LUSE Logical Unit Size Expansion. The LUSE feature is available when the HP StorageWorks LUN
Manager product is installed, and allows a LUN, normally associated with only a single LDEV,
to be associated with 1 to 36 LDEVs. Essentially, LUSE makes it possible for applications to access
a single large pool of storage.
M-VOL Main volume.
MCU Main control unit.
MU Mirror unit.
P-VOL Primary volume.
parity group A set of hard disk drives that have the same capacity and that are treated as one group. A parity
group contains both user data and parity information, which enables user data to be accessed
if one or more drives in the group is not available.
path A path is created by associating a port, a target, and a LUN ID with one or more LDEVs. Also
known as a LUN.
PCB Printed circuit board.
port A physical connection that allows data to pass between a host and the disk array. The number
of ports on a disk array depends on the number of supported I/O slots and the number of ports
available per I/O adapter. The P9000 and XP family of disk arrays supports Fibre Channel (FC)
183