Installation Procedures - HP StorageWorks XP48 - Disk Array Configuration Manual

Installation procedures

Installation
The HP representative and you perform the following procedures:
1. "Install and configure the disk array" on page 14
• Setting the System Option Modes
• Configuring the Fibre Channel ports
• Setting the Host Mode for the disk array ports
2. "Install and configure the host" on page 18
• Loading the OS and software
• Installing and configuring the HBAs
• Clustering and Fabric zoning
• Fabric zoning and LUN security for multiple operating systems
3. "Connect the disk array" on page 21
• Defining the paths
• Verifying disk array device recognition
4. "Configure disk array devices" on page 24
13