Adding The Browser Pathname To The Properties File; Uninstalling Fabric Manager - HP Surestore 6164 - Switch Quick Start Manual

Adding the Browser Pathname to the Properties File

Uninstalling Fabric Manager

54
When a correct address is entered, Fabric Manager launches, displaying
the default view, Fabric View. For more information about using Fabric
Manager, see the HP Surestore FC Switch 6164 Installation and
Reference Guide.
If the browser is installed after Fabric Manager is installed, the properties
file must be edited to show the correct path for the browser.
Editing any information other than the browser pathname in the
Note
properties file is not recommended.
To add the browser pathname to the properties file:
1. Open the directory where Fabric Manager is installed. The default
directory is
c:\Program Files\Fabric Manager\
2. Double-click the
(such as Notepad) as the application for this file.
3. Enter a new line starting with "BrowserPath=", followed by the correct
pathname for the browser, in quotes. For example:
BrowserPath="C\:\\Program Files\\Internet Explorer\\iexplore.exe"
This line can be added anywhere in the file, provided it does not
interrupt another line.
The uninstaller can only access the most recent installation. To
Note
uninstall an additional installation, open the corresponding installation
folder, open the subdirectory UninstallerData, and double-click Uninstall
FabricManager.exe to launch the uninstaller.
To uninstall Fabric Manager:
1. Select Start > Settings > Control Panel.
2. Double-click the Add/Remove control panel.
FabricManager.Properties
, where " " is the local drive.
c
file, and select a text editor
Quick Start Guide