Date Example; Date Suggested Action; File - HP 3PAR StoreServ 7000 Troubleshooting Manual

date Example

Component -Identifier- -----------Detailed Description-----------
Date --

date Suggested Action

The time on the nodes should stay synchronized whether there is an NTP server or not. Use
showdate to see if a node is out of sync. Use shownet and shownet -d to see the network
and NTP information. NTP will not adjust the time for significant time differences, use the setdate
cli command to set the time, date and time zone on all nodes.
cli% showdate
Node Date
0 2010-09-08 10:56:41 PDT (America/Los_Angeles)
1 2010-09-08 10:56:39 PDT (America/Los_Angeles)
cli% shownet
IP Address
192.168.56.209
Duplex AutoNeg Status
Full Yes
Default route: 192.168.56.1
NTP server: 192.168.56.109
cli% showdate
Node Date
0 2015-05-21 14:31:19 PDT (America/Los_Angeles)
1 2015-05-21 14:31:19 PDT (America/Los_Angeles)
cli% setdate -tz America/Denver
Timezone set successfully.
cli% setdate 05211532
You specified the date as 2015-05-21 15:32:00 MDT
Is this correct?
select y=yes n=no: y
Node 0 time set to 2015-05-21 15:32:00 MDT
Node 1 time set to 2015-05-21 15:32:00 MDT
cli% showdate
Node Date
0 2015-05-21 15:32:08 MDT (America/Denver)
1 2015-05-21 15:32:08 MDT (America/Denver)

file

Displays file system conditions that are not optimal:
Checks that required system volumes are mounted
Checks for process, kernel and HBA cores on node disk drives
Checks for node file systems that are too full
Checks for behavior altering files on the node disk drives
Checks if an online upgrade is in progress
Many issues reported by the file component will require you to contact HP support to request
support your system. See
44 Troubleshooting
Date is not the same on all nodes
Netmask/PrefixLen
255.255.255.0
Active
"Contacting HP Support about System Setup" (page
Nodes Active Speed
0123 0 100
73).