Problem
What to Do
Other SCSI
devices no longer
work when this disk
is installed
•
There is probably a conflict in SCSI IDs. Check ID
assignment
•
Refer to the instructions for your host adapter and review
installation of devices on the bus.
Unable to read from
a disk
•
Check power and connections. See "Drive won't power on"
discussed previously in this table
•
Does the host computer recognize the drive on the bus? See
"Host system does not recognize the drive" discussed
previously in this table.
•
Does the host computer recognize the drive on the bus? See
"Host system does not recognize the drive" discussed
previously in this table.
•
Does the disk have a valid file system?
-If the disk does not have a valid file system,
you must format the disk (Windows 95, NT) or
do a media init (HP-UX). For other Unix
systems, refer to your System Administrator's Guide to
prepare the disk.
•
Is write verify enabled to ensure that information is being
correctly written to the disk?
Continued on the next page
Chapter 3
Operating the Disk Drive
Troubleshooting
3-7