Snmp Trap Registration Group - HP Surestore 64 - Director Switch Manual

SNMP Trap Registration Group

The trap registration group allows for the control of trap generation on the HP EFC Server
SNMP agent. The group consists of two scalar objects and a trap registration table.
Table 2-10
Object
trapMaxClients
trapClientCount
Trap Registration Table
This table contains a row for each trap recipient. When the SNMP agent generates a trap a
copy is sent to each of the recipients in the table depending upon the severity of the trap
and the setting of the trapRegFilter object.
Table 2-11
Object
trapRegIpAddress
trapRegPort
TrapRegFilter
Read/write
TrapRegRowState
Read/write
SNMP Trap Registration Group
Provides
The maximum number of trap recipients is returned. For the director this value
is a constant 12.
The current number of trap recipients is returned.
Trap Registration Table
Provides
The IP address of the trap recipient. This table is indexed by this object and by
trapRegPort
The UDP port number of the trap recipient.
This value defines the trap severity filter for this trap recipient. The agent will
send traps to this host that have a severity level less than or equal to this
value. The default value of this object is warning(6).
On read operations rowInactive(2) or rowActive(3) is returned.
Write operations are supported.
RowDestroy(1) causes the trap recipient to be removed from the table.
RowInactive(2) causes the sending of traps to the recipient to be suspended.
RowActive(3) causes a trap recipient that had previously been set to inactive
to become active again.
29