HP StorageWorks X5000 Release Note page 6

Issue:
Install Shield Error 1607/1628 during Service Release installation
Description
Workaround Run the Service Release again after ensuring that no instances of the processes
Issue:
The NAS Updater utility shows the edition information as "0" for the Windows Storage Server
2003 R2 Express edition
Description
Workaround No workaround is required.
Issue:
The NAS Updater utility installed with Service Release 5.6 cannot be used for installing Service
Release 6.2 components
Description
Workaround Install the NAS Updater utility bundled with Service Release 6.2 by using the
Issue:
Text does not get resized properly with the NAS Updater utility
Description
Workaround Close and restart the update application.
Issue:
User intervention required during installation of SMS v2.01on HP ProLiant DL100 G2 servers with
the IMB v3.0 driver
Description
Workaround Accepting the warning message by clicking Continue proceeds with the installation
6
Service Release 6.2 installation
Installation error 1607:
Scripting Runtime and/or 1628:
installation may be reported during installation of the Service Release. This
error can occur for various reasons, the most prevalent being a driver did not
exit properly when the Service Release is run the first time. This issue is currently
under investigation.
named msiexec.exe, setup.exe, or idriver.exe are running.
On an HP storage server running Windows Storage Server 2003 R2 Express
edition, the NAS Updater displays the Express edition information as "0." This
information is shown as Windows Storage Server 2003 R2 (SP1); 0
instead of being displayed as Windows Storage Server 2003 R2 (SP1);
Express Edition.
The NAS Updater utility installed with Service Release 5.6 cannot be used to
launch the Service Release 6.2. Attempting to install Service Release 6.2 with the
older utility results in the error message Version of NAS Updater on this
system does not support SR6.2 installation.
latest version of NAS Updater.
setup.exe file located at the root level of the DVD.
When the graphics settings are changed on a NAS server while running the
update application, the update application text does not get resized.
During installation of the Server Management System v2.01 on DL100 G2 servers,
the IMB v3.0 driver sometimes displays a security warning stating the driver does
not have digital signature.
without any issues.
Unable to install Install Shield
failed to complete
Please install