Data Protection Manager - HP StorageWorks X5000 Release Note

Hp proliant storage server with windows storage server 2003 r2 - release notes (5697-6073, october 2006)
Hide thumbs Also See for StorageWorks X5000:
Table of Contents

Advertisement

Description
Workaround
Issue:
Help files are not displayed for Broadcom Advanced Control Suite
Description
Workaround

Data Protection Manager

This section describes issues related to Microsoft Data Protection Manager (DPM) running on HP ProLiant
Storage Servers.
Issue:
Two hotfixes need to be installed after running DPM mini-setup
Description
Workaround Not applicable.
Issue:
DPM Administration tool can overwrite data on a physical disk with no warning given
Description
Workaround Always click the Rescan option before adding new disks to DPM.
Issue:
DON'T ERASE disk can be added to the DPM storage pool
Description
Workaround Do not use the DON'T ERASE disk to store DPM data.
Issue:
Event ID:1101 SNMP warning displayed in System Event log
Additional applications and utilities
A blank page opens as hpapp://ADU/default.htm when the Array Diagnostic
Utility 7.40.7.0 is executed. The blank page does not close after the Array
Diagnostic Utility is closed.
Close the window manually.
When selecting the Help button for the Broadcom Advanced Control Suite (Start >
Programs > Broadcom > Broadcom Advanced Control Suite 2), the Help files are
not displayed for the DL100 G2 server.
HP engineers are working to resolve this issue.
Data Protection Manager
The following two hotfixes should be installed only after the DPM mini-setup is
complete:
DataProtectionManager2006–KB910330.exe
DataProtectionManager2006–KB911169.exe
These hotfixes can be obtained from the c:\hpnas\components\hotfix
folder on the Data Protection Storage Server.
On storage servers with Data Protection Manager, if certain steps are followed,
volumes can be created on a physical disk that the DPM Administration tool does
not see. If these physical disks are allocated to DPM, the volumes will be removed
with no warning about data loss given to the user.
The DON'T ERASE disk is displayed in the list of disks that can be added to the
storage pool in DPM. The DON'T ERASE disk is used during a Quick Restore, and
any data on this disk will be deleted in the event of a Quick Restore.
Storage Server with Windows Storage Server 2003 R2 release notes
19

Advertisement

Table of Contents
loading

Table of Contents