Additional Applications And Utilities - HP StorageWorks X5000 Release Note

Hp proliant storage server with windows storage server 2003 r2 - release notes (5697-6073, october 2006)
Hide thumbs Also See for StorageWorks X5000:
Table of Contents

Advertisement

Additional applications and utilities

This section provides additional information on using certain applications and utilities on the storage
server.
Issue:
Warning message that a Broadcom NIC is not fully certified to support NIC teaming
Description
Workaround
Issue:
JRE-dependent applications or web sites prompt for JVM installation, or it is not properly
displayed
Description
Workaround
Issue:
Unable to create a volume on a SAN using Virtual Disk Services (VDS) provider for the MSA 1500
Description
Workaround
Issue:
VDS provider for MSA does not refresh after volume creation fails
Description
Workaround
Issue:
Storage Manager for SAN stops responding when Subsystem is selected
Description
Additional applications and utilities
Storage Servers using the Broadcom Advanced Control Suite (BACS) application
may see a warning message notification stating [0001] Broadcom
NetXtreme Gigabit Ethernet is not fully certified for
supporting teaming.
The warning notification can be ignored and the Create Team action can continue
by selecting Yes. HP engineers are working to correct this anomaly.
A web site or application that is dependent on Java Virtual Machine (JVM) is not
displayed properly with Internet Explorer. A message prompts you to install JVM.
Uninstall the Java Runtime Environment (JRE) using the Control Panel and Add or
Remove Programs. Reinstall the JRE from the c:\hpnas\components\JRE
folder.
Creating a volume using the Create a New LUN wizard and also selecting
the Create Volume option on Storage Manager for SAN launched from the
HP Storage Server Management console sometimes results in a message
stating Storage Manager for SANs was able to create the LUN,
but could not create the volume because the disk did not
arrive in 5 minutes.
Use the Array Configuration Utility (ACU) to create the LUN and then use the Disk
Manager utility on the Windows storage server to create the LUN volume.
Creating a LUN and volume using the Create a New LUN wizard using Storage
Manager for SAN results in the volume creation failing and displays a warning
icon on the created volume in the Storage Manager for SAN user interface.
The warning icon continues to display even after closing and re-opening the HP
Storage Server Management console. Attempting to delete the LUN results in the
Storage Manager for SAN user interface becoming unresponsive and unable to
proceed past the delete LUN dialog box.
Do one of the following:
Restart the system to load the LUNs and to refresh Storage Manager for SAN.
Use the Array Configuration Utility (ACU) to create the LUN on the MSA, and
then use the Disk Manager utility on the Windows storage server to create
the LUN volume.
When Subsystem is clicked in Storage Manager for SAN, the system stops
responding and displays the message MMC has detected an error in a
snap-in and will unload it. This behavior is seen only when any of the
MSA subsystem volumes are being expanded.
Storage Server with Windows Storage Server 2003 R2 release notes
Do you want to continue?
17

Advertisement

Table of Contents
loading

Table of Contents