Table of Contents
Advertisement
Transmitting Voice
Diagnostic/Test Keyload
All Conventional Modes
PA is PTT'd
STATUS/MESSAGE OPERATION
Status Operation
Status operation permits the transmission of a pre-
programmed status condition to the EDACS site.
To send a status condition, press the
press one of the number keys (
the pre-programmed status. If no status has been pro-
grammed for the selected number key, the radio will
display "NO ENTRY". A valid selection will permit the
status text to appear in the display for a pre-programmed
time. After the time-out expires or the
been pressed (the
period), the status is selected and will be transmitted to
the site or stored in the radio memory where it can be
polled by the site at a future time. If the site does not
receive the status properly, the radio will sound a low
pitched tone.
If an incorrect status was selected or the incorrect
number key was pressed, the status can be changed
during the pre-programmed time-out period by pressing
another number key. The status selection can also be
cancelled by pressing the CLEAR button prior to the
time-out period.
key will override the time-out
key then
) to select
key has
85
Advertisement
Table of Contents
