Table of Contents
Advertisement
BUTTONS AND KNOBS
This section describes the primary function of the
button and knob controls. Other functions associated
with these controls are detailed in later sections.
SYSTEM
/GROUP
/CHANNEL
KNOB
POWER
ON-OFF
/VOLUME
KNOB
Selects systems or groups/channels
(depending on programming). This is
a 16 - position rotary knob. See SYS-
TEM/GROUP/CHANNEL SELEC-
TION for details.
Applies power to the radio and ad-
justs the receiver's volume. Rotating
the control clockwise out of detent
applies power to the radio. A single
alert tone sounds (if enabled through
programming) to indicate the radio is
operational.
Rotating the control clockwise in-
creases the volume level. Minimum
volume levels may be programmed
into the radio to prevent missed calls
due to a low volume setting. While
adjusting the volume the display will
momentarily indicate the volume
level (i.e. VOL = 31 ). The volume
range is from a minimum pro-
grammed level of zero (displayed as
OFF in the display) up to 31 which is
the loudest level.
17
Advertisement
Table of Contents
