Pre-Programmed Keypad Key; Scanning Trunked Groups; Adding Groups To A Scan List; Deleting Groups From A Scan List - Ericsson LBI-38732E Operator's Manual

Pre-Programmed Keypad Key

Press the pre-programmed key and the SYSC ON or
SYSC OFF display message is displayed for two sec-
onds to show the new state.

SCANNING TRUNKED GROUPS

Groups which have been previously added to the
scan list on a per system basis may be scanned. Each
system's group scan list is retained in memory when the
radio is turned off or when the battery pack is removed.
The following procedures outline scan operations for
trunked groups. See the conventional mode operating
procedures for specific procedures on conventional
channel scanning.

Adding Groups To A Scan List

1. With scan operation turned off, select the desired
group to add to the selected system's group scan list.
2. Press
system's group scan list will show
selected group.

Deleting Groups From A Scan List

1. With scan operation turned off, select the desired
group to delete from the selected system's group
scan list.
68
S
. comes on. Any group that is in a
S
when it is the