Telephone Interconnect Calls; Receiving A Telephone Interconnect Call (Trunked Mode Only); Sending A Telephone Interconnect Call (Trunked Mode Only) - Ericsson LBI-38732E Operator's Manual

TELEPHONE INTERCONNECT CALLS

Receiving A Telephone Interconnect Call (Trunked
Mode Only)
Receiving a telephone interconnect call is identical to
receiving an individual call. See the DTMF Overdial
Operation section if access to services requiring "over-
dial" is needed. Overdial operations are available for any
special call whether it is an individual call or a telephone
interconnect call.
Sending A Telephone Interconnect Call (Trunked
Mode Only)
Use the following procedures to initiate and complete
a Telephone Interconnect call:
1. To select a previously stored phone number, press
followed by
the list of stored phone numbers.
selection mode rules apply. If the phone number is
not stored in this list but the phone number is known,
it can be entered directly from the keypad. If neces-
sary, a pause can be entered by pressing and hold-
ing
derscore appears in the display. The last entered
phone number can be recalled by pressing the OP-
TION button.
2. Press and release the PTT button; the radio performs
the necessary signalling to obtain a communication
channel. When the signalling is complete and the
radio is clear to transmit,
76
or
SPC
,
or
XMIT
turns on,
to scroll through
turns on. The
until an un-
BSY
turns