Programmable Entries - Ericsson LBI-38732E Operator's Manual

Ericsson operator's manual portable radio lbi-38732e
Table of Contents

Advertisement

Individual call ID numbers, telephone numbers and
other number sequences for overdialing are stored in the
special call lists when programming the radio. The first
ten entry locations of these lists can be changed by the
radio operator. The keypad is used when adding, chang-
ing and storing numbers in these entry locations.
Use the following procedure to store a number in one
of the first ten entries of a special call list:
1. Press
or the phone call list.
mode rules apply.
2. Scroll through the list using
one of the first ten entries is reached. NO ENTRY is
displayed if the location is empty.
3. Enter the desired number. If necessary, a pause can
be entered by pressing and holding
or
display. The individual call list entries will accept up
to 5 digits. The phone call list entries accept a com-
bination of up to 31 digits and pauses.
4. Press and hold
indicating that the number has been stored.
5. Repeat the steps above if the number stored in an
entry location needs to be changed.

PROGRAMMABLE ENTRIES

or
until an underscore appears in the
to enter the individual call list
SPC
turns on. The selection
until the display changes
or
until
71
,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Edacs m-rk ii

Table of Contents