Table of Contents
Advertisement
A value of 16 requires a strong signal to open
squelch, a value of 2 requires a very weak signal
to open squelch and a value of 1 is open squelch.
When squelch adjust feature is activated,
Channel Guard, T99 decode and Scan are
disabled. When the squelch adjust feature is
exited, Channel Guard, T99 decode and Scan are
restored to their previous states.
Menu Selection
1. Press the
or
SQUELCH is displayed. Then press
LECT) again.
2. The display will show SQLCH=xx , where "xx" is the
value between 1 and 16.
3. Use the RAMP control
through the values. Then press the
save the new value after the display time-out (2
seconds). The displayed value will be selected and
saved.
4. If the
menu feature will exit and the squelch level will not
be updated. The original value will be restored.
90
NOTE
NOTE
key and then use the RAMP control
to scroll through the selections until
key is pressed before the time-out, the
or
to scroll
(SE-
key to
Advertisement
Table of Contents
