Optical Drive - HP CQ58-300 Maintenance And Service Manual

Optical drive

Description
DVD±RW Double-Layer with SuperMulti Drive (includes optical drive bezel and optical
drive bracket)
Before removing the optical drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the memory module/wireless module compartment cover (see
on page
Remove the optical drive:
1.
Remove the Phillips PM2.5×4.0 screw (1) that secures the optical drive to the computer.
2. Use a flat-blade screw driver or similar tool to press on the optical drive bracket tab (2) to release
the optical drive.
3. Remove the optical drive (3) from the computer.
Battery on page
41).
40).
Component replacement procedures
Spare part number
686268-001
Memory module
49