Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP CQ58-300 Maintenance And Service Manual

4 Removal and replacement
procedures

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers

Service considerations

The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.

Plastic parts

CAUTION:
care when handling the plastic parts. Apply pressure only at the points designated in
the maintenance instructions.
Using excessive force during disassembly and reassembly can damage plastic parts. Use
Preliminary replacement requirements
33