System board
NOTE:
The system board spare part kit includes replacement thermal material.
Description
Equipped with the Intel HM75 Express chipset, an Intel Dual Core i5 or i3 processor, and the
Windows 8 Professional operating system
Equipped with the Intel HM75 Express chipset, an Intel Dual Core i5 or i3 processor, and the
Windows 8 Standard operating system
Equipped with the Intel HM70 Express chipset, an Intel Pentium or Celeron processor, and the
Windows 8 Professional operating system
Equipped with the Intel HM70 Express chipset, an Intel Pentium or Celeron processor, and the
Windows 8 Standard operating system
Before removing the system board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Memory module/wireless module compartment cover (see
b.
WLAN module (see
c.
Keyboard (see
d.
Optical drive (see
e.
Hard drive (see
f.
Top cover (see
When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
Memory module (see
●
RTC battery (see
●
Fan/heat sink assembly (see
●
Processor (see
Battery on page
WLAN module on page
Keyboard on page
Optical drive on page
Hard drive on page
Top cover on page
Memory module on page
RTC battery on page
Fan/heat sink assembly on page
Processor on page
73)
40), and then remove the following components:
42)
45)
49)
51)
55)
41)
54)
Component replacement procedures
Spare part number
686280-601
686280-501
688018-601
688018-501
Memory module on page
71)
41)
69