Table of Contents
Advertisement
Removal and Replacement Procedures
Symbols on Equipment
25 kg
55 lb
CLASS 1 LASER PRODUCT
Rack Warnings and Cautions
WARNING: To reduce the risk of personal injury or damage to the
equipment, adequately stabilize the rack before extending a component
outside the rack. Extend only one component at a time. A rack may
become unstable if more than one component is extended.
WARNING: To reduce the risk of personal injury or damage to the
equipment:
•
•
•
•
WARNING: When installing the device in a Telco rack, adequately secure
the rack frame to the building structure at the top and bottom.
2-2
Any product or assembly marked with these symbols indicates that the
component exceeds the recommended weight for one individual to
handle safely.
WARNING: To reduce the risk of personal injury or damage to the
equipment, observe local occupational health and safety
requirements and guidelines for manual material handling.
Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or a hot component.
WARNING: To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
Any surface or area of the equipment marked with these symbols
indicates the presence of electrical shock hazards. The enclosed area
contains no operator serviceable parts.
WARNING: To reduce the risk of injury from electrical shock
hazards, do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a network
interface connection.
WARNING: To reduce the risk of electrical shock, fire, or damage
to the equipment, do not plug telephone or telecommunications
connectors into this receptacle.
This label or equivalent is located on the surface of your CD-ROM
drive. This label indicates that the product is classified as a
Class 1 Laser Product.
Extend the leveling jacks to the floor.
Rest the full weight of the rack on the leveling jacks.
Attach the stabilizers to the rack if it is a single rack installation.
Racks are coupled in multiple rack installations.
NAS B2000 Maintenance and Service Guide
Advertisement
Table of Contents
