Table of Contents
Advertisement
Removal and Replacement Procedures
CD-ROM Drive
To eject the CD-ROM drive:
1. Power down the device. See the "Powering Down the Device" section in this chapter.
2. Push the ejection button.
3. Pull the CD-ROM drive out the CD MultiBay.
Figure 2-22: Ejecting the CD-ROM drive
CAUTION: Always populate the CD MultiBay with either a CD-ROM drive or a
CD blank. Operating the device without installing a CD-ROM drive or CD blank
results in improper airflow and improper cooling that can lead to thermal
damage.
To replace the CD-ROM drive, slide the CD-ROM drive into the CD MultiBay until it is
fully seated.
2-24
2
1
NAS B2000 Maintenance and Service Guide
Advertisement
Table of Contents
