Ericsson 230 User Manual page 87

86 Reference
Do I get a warning before the batteries run out?
An alarm sounds when approximately fifteen minutes' calling time is left.
How can I subscribe a handset to a base station?
To subscribe a handset you need the authentication (PIN) code of the base sta-
tion. How to subscribe is explained in "Subscribing to a base station" on
page 78.
What should I do if the handset dials a number as soon as I press
a key?
A direct call has been set. See "Direct call" on page 60.
What should I do if I do not hear anything when I pick up the
handset and the red light on the base station is flashing?
The base station is not properly connected to the telephone line. Check the
telephone line cable.
Why do I keep on hearing the dial tone after I have dialled a
number?
If you dial a number and still hear the dial tone, you probably have to set the
base station to another dialling method. See "Pulse or tone dialling" on
page 72 for more details.
I cannot understand the language on the display. Why?
An incorrect language has been selected.
To correct this:
1. Press .
CL R
The handset returns to the standby display.
2. Press 5 x ,
U P YE S
from the list and press
Some menu options are in another language on the display. Why?
These options are the base station menus which form a part of the handset
menus. They are normally in the same language as the handset menus. If the
handset language is not available, the base station chooses English by default.
To choose another default language:
1. Press .
CL R
The handset returns to the standby display.
2. Press 4 x ,
U P YE S
tion (see page 58), 2 x
list and press
YE S
, 3 x and . Select the language of your choice
U P Y E S
.
Y E S
, 3 x , , enter the PIN code for the base sta-
D O W N Y E S
. Select the language of your choice from the
Y E S
.