Ericsson 230 User Manual page 18

No Network
Home 1
0:00:06
0201482571
If the indicator is not visible, then the handset is not connected to a base sta-
tion. This may mean:
• You are out of range.
Check that the base station is on and that you are within range.
• There is no access to the base station.
The handset is not able to connect or its access rights may have changed.
Set the handset to automatic base station selection and if that does not
help, subscribe the handset to the base station again.
• There is no subscription to the base station.
Subscribe the handset to the base station.
Please refer to section "Using base stations" on page 77 for further
information.
Switching on
Before you can use the handset you must switch it on:
• Press for at least one second to switch the handset on.
N O
The standby display appears. The number on the right-hand side is the
internal number of the handset on the base station.
Making a first call
Check that the set is installed correctly by dialling a person you know.
To make a call:
1. Press and you can hear the dial tone.
Y E S
A red light appears on the top of the base station.
2. Dial the number you want to call using the number keys.
You hear the ringing tone.
3. Wait for an answer and, on completing your call, ask the person to call you
back.
Getting started 17