Ericsson 230 User Manual page 70

Home 2
John 2
PIN code, is secret and prevents other handsets subscribing to the base station
without your approval.
If the handset does not have a subscription, it automatically enters the sub-
scription mode when it is switched on. In this case, the handset displays
<Page> base station first and then
and three of the procedure below.
To subscribe a DT200 handset to the base station:
Route: Networks » Subscribe
1. Press the button on the base station for at least two seconds.
P A G E
2. Select Subscribe and press
Enter PIN: , Enter AC:
handset already has eight subscriptions and to add a new subscription you
have to delete another.
3. If requested enter the PIN code for the handset (see page 58) and press
.
Y E S
Enter AC: is displayed.
4. Enter the authentication (PIN) code of the base station.
Each digit of the AC number that you enter is shown only as
purposes.
5. Press to confirm.
Y E S
The handset now looks for base stations in subscription mode using the
AC number to test if it is allowed to subscribe.
6. Wait until
Subscription Ready
The handset is connected to the base station. You can see its internal phone
number on the right-hand side of the display.
In case of the following message, try to subscribe again:
• Subscription Failed : the AC number you have entered does not match the base
station PIN code or the base station already has eight handset subscrip-
tions. To add a handset you have to delete the subscription of another
handset.
You can provide a personal identity for the base station. The name is arbitrary
and is shown in the display when the handset is connected to the base station
and on standby. See "Editing base station name" on page 81.
Subscribing another type of handset
Your base station functions can be fully utilized when used in combination
with a DT200 handset. If it is used with another type of handset, there are a
few functions that will not work.
Please refer to the handset documentation for subscribing another type of
handset to the base station. To initiate subscription, you have to press the
Enter AC: appears. If so, you can skip step two
.
Y E S
or Subscr. List Full is displayed. In the latter case, your
is displayed for a short time.
Press
for security
Extra features 69