Av Complu Link Remote Control System - JVC RX-ES1SL Instructions Manual

A V COMPU LINK remote control system
The AV COMPU LINK remote control system allows you to operate JVC's video components (TV, DVD player and VCR) through this
receiver.
This receiver is equipped with the AV COMPU LINK-Ill, which has added a function to operate JVC's video components through the video
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the
diagrams below and the procedures on page 33.
• Refer also to the manuals supplied with your video components.
CONNECTIONS 1 : AV COMPULINK Connection
J
COMF_ LINK
AV o
VCR
\
DVD Player
" .... _1 Monaural mini-plugs
TV
AV
COIWPU UNK4H
or
Monaural mini-plugs
IMPORTANT:
The AV COMPU LINK remote control system cannot control the DBS
tuner connected to the DBS terminals.
CAUTION:
When connecting the TV with the AV COMPU LINK
remote control system, connect the receiver to the
AV COMPU LiNK EX or AV COMPU LINK-III
terminal. DO NOT connect the receiver to the AV
COMPU LINK RECEIVER/AMP terminal.
• When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic
selection of TV's input mode (see page 33).
• When connecting the DVD player or VCR and TV to this receiver, connect it directly to the receiver using cable with monaural mini-plugs.
CONNECTIONS 2: Video CableConnection
This receiver is equipped with three types of the video terminals--composite video, S-video, and component video, and the signals coming into
this receiver through one type of video terminals can output only through the terminal of fhe same type. So you need to connect the VCR and TV
to this receiver using one of the following three ways.
• When using the AV COMPULINK remote control system, set the component video input for the DVD player and the DBS tuner correctly (see
"Setting the video component input mode--DVD VlDEO/DBS VIDEO" on page 20); otherwise, the correct input for this receiver will not be
selected on the TV.
CASE 1 : When connecting the source equipment r /
to the receiver through the S-video [ Source
terminals, connect this receiver to the Equipment S-video cord RX-ES1SL
TV's Video Input 1 terminal using S-video
cords.
IS-video cord [
TV
To Video Input 1
[ ,v
To Video Input 2
(Composite)
[ ,v
To Video Input 2
(Component)
CASE 2: When connecting the source equipment
to the receiver through the composite
video terminals, connect this receiver to
the TV's Video Input 2 terminal (composite
video input) using composite video
cords.
Source t t
Equipment Composite RX-ES1SL Composite
video cord video cord
CASE 3: When connecting the source equipment
to the receiver through the component
video terminals, connect this receiver to
the TV's Video Input 2 terminals
(component video input) using
component video cords.
Source t t Equipment Component RX-ES1SL Component
video cord video cord
32