Av Compu Link Remote Control System - JVC XV-THA10 Instructions Manual

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC video components (TV and VCR) through the center unit.
To use this remote control system, you need to connect the video components you want to operate, follow the diagrams below and the
procedure on the next page.
CONNECTIONS 1 ———————————————————————————————————————
TV
CAUTION:
The AV COMPU LINK remote control system cannot control the DBS
tuner connected to the TV SOUND/DBS jacks on the center unit.
CONNECTIONS 2 ———————————————————————————————————————
CASE 1 : If the components are equipped with the S-video terminals.
To Video input 1
TV
CASE 3 : If only the VCR is equipped with the S-video terminal.
To Video input 1
TV
To Video input 2
52
VCR
DO NOT use these video terminals.
VCR
DO NOT use these video terminals.
Notes:
• Refer also to the manual supplied with your video components.
CASE 2 : If the components are not equipped with the S-video terminals.
DO NOT use these video terminals.
TV
To Video input 2
CASE 4 : If only the VCR is not equipped with the S-video terminal.
DO NOT use these video terminals.
To Video input 1
TV
To Video input 2
VCR
VCR
VCR