Setting The Flash - HP Photosmart 930 SERIES User Manual

When you have not changed
Exposure Compensafi®n for
2 seconds, the meter disappears,
but the value remains at the bottom
of the screen flanked by arrows
(unless it has been set to 0).
Ex_sure Compensafio_'_resets to
the default 0 (zero) setting when you
turn the camera off.
g÷t [ng the fWash
NOTE The flash does not work while recording video clips.
The Flash button letsyou toggle
between the four flash settings
on the camera. Auto As is the
default flash setting. The flash
setting resets to Au_o when you
turn the camera off.
To change the flash setting,
press the F[_sh button on the top of the camera until the Flash
Off @, Flash On f,, or Night _l flash light is lit. The default
Auto A_,flash setting is selected when none of the three
flash lights is lit. The following table describes the different
flash settings.
Chapter 2: Taking pidures and recording video dips 33