Table of Contents
Advertisement
To print directly to an HP Photosmart printer or to any other
HP printer with a front panel USB port:
]
Check that the printer is turned on and
is online. (There should be no blinking
lights on the printer or error messages
displayed about the printer.) Load
paper into the printer, if needed.
2 Your camera came with a special USB
cable for connecting the camera
directly to a printer. Connect the square
end of the USB cable to the printer.
3 Open the rubber door on the side of
the camera and connect the small end
of the USBcable to the USBconnector
on the camera.
The Prn_ Setup menu displays on
the camera. If you already
selected images to print from the
camera Share menu, the number
of images selected will be shown,
as in this example Print Setup
menu. Otherwise, _mages:ALL
will be displayed.
4 Adjust the settings in the Print Setup menu by using the
_. v
buttons to highlight a menu option and the
_ Buttons to change the setting for each option.
NOTE There is a print preview in the lower right-hand corner
of the Print Setup screen showing the page layout that will
be used for printing images. This print preview updates as
you change the settings for the Print Size and Pa_r Sze.
5 Pressthe OK button to begin printing.
Chapter 5: Unloading and printing images
69
Advertisement
Table of Contents
