Nikon COOLPIX P7100 Reference Manual page 27

Shooting
Menu
(P,S,A or M Mode)
_1_ Notes on the Wide-angle Converter for Shooting
• Set Wide-angle converter to On before shooting, Set Wide-angle converter to None when
no converter lens is attached.
• The built in flash is set to (_) (off) when Wide-angle converter is set to On, Use flash units
(_'_101) (available separately) to shoot with the flash
• Using the flash units (available separately) may darken the peripheral area of the picture Check the
picture on the monitor after shooting. A wide flash adapter is recommended when shooting with
the Speedlight SB 600, SB 700, SB 800 or SB 900
• AF assist illuminator cannot be used when Wide-angle converter is set to On
• This feature may not be used in combination with certain features See "Features That Cannot Be
Used Simultaneously" (_80) for more information
[] Installing and Removing
the Lens
Ring
• Before attaching the wide angle converter,
remove the lens ring Before installing or
removing the lens ring, be sure to turn off
the camera While pressing the lens ring
release button, rotate the lens ring
clockwise and remove it
• To attach the lens ring to the camera, align
the lens ring mounting index (white dot) Lens ring release button
with the lens ring release button, and then
rotate the lens ring counterclockwise
• When not using the wide angle converter, be sure to attach the lens ring onto the camera
• For more information on attaching the wide angle converter, see the instruction manual provided
with the wide angle converter
Flash Control
Rotate the mode dial to
P, S, A
or
M
-_
MENU
b utton -)
P, S, A
or
M
tab (_13) -_ Flash control
You can set the built-in flash to offeven when you are not using a $peedlight
(external flash unit) (_101) attached to the camera's accessory shoe.
d)
R
d)
t_
5"
_1_ Note on Flash Control
This feature may not be used in combination with certain features See "Features That Cannot Be
Used Simultaneously" (_80) for more information