Nikon COOLPIX L15 User Manual page 25

_1_ Replacing Batteries
Turn the camera off and make sure that the power or] lamp and the monitor have gone out before
opening the battery chamber/memory card slot cover
[_ Additional Precautions Regarding Batteries
• Read and follow the warnings and cautions (PI_ iii, 98)
• Do not combine old and new batteries or batteries of different makes or types
• Batteries with the following defects cannot be used:
Batteries with peeling
Batteries with insulation that
does not cover the area
around the negative terminal.
Batteries with a flat
negative terminal
_1_ Battery Type
To improve battery perfonqance, select the type of battery currently inserted in the calqera in the
setup menu The default setting is the type of batter}, supplied with purchase If your camera was
purchased in Europe and alkaline batteries were supplied, change the setting to [Alkaline] When
any other type of batter}, is used, turn the camera on and change the setting ([] 93)
[]
Alkaline Batteries
Performance of alkaline batteries may vary greatly depending on the manufacturer Choose a
reliable brand
[] Alternative Power Resources
To power the camera continuously for extended periods, use an EH 6BA AC adapter (available
sepa rarely) ([] 95). Do not, under any circumstances, use another make or model ofA C
adapter. Failure to obse/'_e this precaution could result in overheating or in damage to the camera
[] Power Saving Function in Shooting Mode
If no operations are performed for about five seconds, the monitor will dim to save power Using any
of the camera controls will reactivate the display. The monitor turns off if no operations are
performed for thirty seconds (default setting) The camera enters standby mode
After a further three minutes, the camera will turn off automatically (_ 88)
13