Table of Contents
Advertisement
Auto Off
To reduce
the drain on the batteries,
the monitor
turns
off and the camera enters
standby
mode
([]
13), if no operations
are performed
for a certain
period
of time.
The power
on lamp flashes in standby
mode.
If no operations
are performed
for
another
three
minutes,
the camera
turns off automatically.
Use this option
to set time before
camera
enters
standby
mode.
Auto off
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed
from [30s] (default setting), [1m], [Sm], and [30m].
Sleep Mode
If [On] (default setting) is selected, the camera will enter standby mode when there
is no change in the brightness of the subject, even before the time selected in the
auto off menu has elapsed
The camera will enter sleep mode after 30 seconds when [Auto off] is set to [1m] or
less, or after 1 minute when [Auto off] is set to [Sm] or more
o
a
@
88
[]
Notes
on Auto
Off
The time
allowed
to elapse
before the camera
enters standby
mode
is fixed in the following
cases:
• While
menus
are displayed:
3 minutes
• While
slide show
is automatically
repeated
or AC adapter
is connected:
30 minutes
Advertisement
Chapters
Table of Contents
