Olympus STYLUS 1050 SW Instruction Manual page 49

Operating during playback mode
When switched to playback mode by tapping the back of the camera body once, the operations
below can be used.
Disp|ay next image." Tap the right side of the camera once
Display previous image_ Tap the left side of the camera once
Start smideshow." Tap the top surface of the camera twice. (The slideshow will automatically
start for all images stored in internal memory or on the card, with [BGM] set to [OFF].)
Display next image during a smideshow: Tilt the camera right or tap the right side of the
camera once.
Dispmay previous image during a slideshow: Tap the left side of the camera once.
Stop sJideshow: Tap the top surface of the camera twice.
To adjust the tap contro_
Select [CALIBRATE] in submenu 2 and press the @ button.
_) Select the part to adjust with _f and press the @ button.
(3_ Select the [STR] setting with _ and press the _ button.
,4_ Select the [INTVL] setting with J_t_.f and press the @ button.
_ Check the operation of the camera by tapping on the camera after making
the settings.
Turning off the camera sounds [,_) SILENT MODE]
@ _ILENT .......................................................................................................................
Activates the [SOUND SETTINGS) setting
The electronic sounds (operating sound, shutter sound, warning sound) and playback
ON sounds are muted
[SOUND SETTINGS[ [p. 43}
E.