Olympus STYLUS 1050 SW Instruction Manual page 23

In a dark location, the LED illuminator can
be used as an auxiliary light to see things or
compose shots
Set [LED mLLUMINATOR] (p. 47) to
[ON].
2 Press and hold the "4 button down
until the LED illuminator lights up.
e If you perform an operation when the LED
illuminator is on it will illuminate up to approx. 90
seconds
LED illuminator
OLYMPUS
_ The LED illuminator turns off if no operation
is performed for approx. 30 seconds
_ Even when the camera's power is turned
off, if the lens barrier is opened, the LED
illuminator lights for 30 seconds.
To turn the LED Hluminator off
Press and hold the 4 button down, until the
LED illuminator turns off.
Changing the shooting
information display
The display of the screen information can be
changed to best match the situation, such as
for the need of clear view of the screen or for
making a precise composition by using the grid
display.
Press the DISR button.
® The displayed shooting information changes in
the order shown below each time the button is
pressed "Shooting mode display" (p. 8)
Normal Histogram
@
No information Grid
Reading a histogram
If the peak fills too much of the frame
the image will appear mostly white
If the peak fills too
much of the frame,
the image will
appear mostly black
The green section shows
the luminance distribution in the
center area of the monitor.
E.