Olympus STYLUS 1050 SW Instruction Manual page 47

To play back camera images on a TV
,! Connect the TV and camera.
Connector cover
Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
(3#Turn on the TV, and change "INPUT' to "VIDEO (an input jack connected to the camera)."
_ For details on changing the input source of the TV, refer to the TV's instruction manual
,4_Set the mode dial to [J_E], and use _f_] to select the image for playback.
_ Depending on the TV's settings, the displayed images and information may become cropped.
Saving battery power between shots Using the LED illuminator as an
[POWER SAVE] auxiliary light [LED ILLUMINATOR]
....... t'$SEZ_E !LLUM!NATOB
Cancels [POWER SAVE]
When the camera is not being
used for approx 10 seconds the
ON monitor automatically turns off to
save battery power.
To resume standby mode
Press any button or turn the mode dial
iiiiiiiiiiiiii_ii_!ii_iiii_ii_iii!ii_i_;_3_i_!i_:_i!i_i_iiiz!i:;ii_ii! ,
Disables the LED illuminator.
ON Enab es the LED um nator
_ "Using the LED illuminator" (p. 23)
EN