Olympus STYLUS 1050 SW Instruction Manual page 46

Using the alarm [ALARM CLOCK]
....... _TSEZU_ ..................................................................................................................
_ When [Q] has not been set, [ALARM CLOCK] is not available.
_ When [_,_)StLENT MODE] (p. 49} is set to [ON}, the alarm will not sound.
_ When [DUALTmME] (p. 45) is set to [ON], the alarm is activated at the date and time set in
[BUALTIME].
-- -- Tile alarm is canceled.
Proceeds to
TIME the time setting
screen")
The alarm is activated once according to the
ONE TIME F/ON selected time, sound and volume settings
:_2/3
W/HIGH
SNOOZE 2
SOUND TYPE
VOLUME
DAILY (Submenus 3 and 4 can be set in the The alarm is activated dally at the same settings.
same way as [ONE TIME].)
"_The setting procedure is identica_ to that in "Setting the date and time" (p. 13).
-2 In this setting, even if the alarm is stopped once, it will be activated every 5 minutes, up to 7 times.
To check the alarm time, press the DISR button while the camera is turned off. The current and
alarm set times are displayed for approx 3 seconds.
To activate the alarm
After making the detailed settings of [ONE
TIME] or [DAILY], press the POWER button to
turn off the camera.
To stop the alarm
When the alarm is activated, press any button
to stop the alarm and turn off the camera.
_ When ]SNOOZE] is set to [OFF], the alarm
stops automatically and the camera turns off
after 1 minute of no operation.
Selecting the video signal system to match your TV [VtDEO OUT]
The TV video signal system varies depending on the countries and regions. Before viev4ng camera
images on your TV, select the video output according to your TV's video signal type.
NTSC Connecting the camera to a TV in North Amedca, Taiwan, Korea, Japan and so on
PAL Connect ng the camera to a TV in European countries, China, and so on
_ The factory default settings differ according to the region where the camera is sold.
EN