MFJ Multi-mode Data Controller -1278B User Manual page 274

MFJ-1278B MULTI-MODE
SETUP
All possible baud rates and modem configurations are displayedon the SETUP menu. The
selected baud rates and modem configurations are also shown.
Anytime the MFJ-1278B default values are loaded the baud rate and modem default profile is
loaded as well. The defaults are shown in the below table:
Modem Mode
P VHF Packet
H HF Packet
V VHF Baudot RTTY
H HF Baudot RTTY
V VHF Ascii RTTY
H HF Ascii RTTY
C CW
C Memory Keyer
P Wefax/Fax
P SSTV
H Amtor/Navtex
M Multi-level FAX/SSTV
The terminal baud rate and modem configurations may be changed by using the SETUP
command.
SFNL ON/OFF
SFNL controls whether the MFJ-1278B adds a new line character to "+?" and WRU.
OPERATIONAL COMMANDS
Mode: ALL Default: see table below
Default Baud Rate/
Speed/ Format
1200
300
45
45
110
110
20 WPM
20 WPM
3 (120 Lines/Min.)
1 (8.5 Sec. format)
100
All Formats
Mode: AMTOR Default: OFF