Initialization - Epson GT-9600 User Manual

Initialization

1
By observing how the scanner acts during initialization, you can
make sure it is operating properly before you connect it to your
computer.
1. Open the document cover so you can see the operation of the
scanner during initialization.
2. Turn on the scanner by pressing the P OPERATE button .
At this time, the carriage moves towards the front of the scanner
slightly. Next, the fluorescent lamp on the carriage flashs for about
10 seconds while the carriage moves forward and back. Finally the
carriage returns to its original position, and then the READY indicator
lamp lights.
1-9
Setting Up the Scanner